פתח תפריט ניווט

קטגוריות ראשיות

פטיפון ESOTERIC GRANDIOSO T1

פטיפון אולטרה Hi-End עם הנעה אלקטרו מגנטית ייחודית וספק כוח חיצוני. כולל זרוע TA-9D. תוצרת יפן.
ESOTERIC GRANDIOSO T1 מכיל מנגנון הנעה ייחודי (פטנט רשום) נטול מגע,
“System MagneDrive ESOTERIC”, המסנכרנת באופן אינדוקטיבי את הסיבובים
של ההנעה המגנטית והפלטה, המבצעים סיבוב שקט וחלק כמשי במהירות סיבוב מדויקת במיוחד.
המגש נקי מכל רטט. סיבוב מגש מדויק לחלוטין, נקי מכל אי-סדירות במהירות, שעלולה להיגרם ממגעים מכניים, כגון חגורה, חישוק או מנוע. כוונון של מאפיינים קוליים, על ידי שינוי ידני של המרחק בין הפלטה להנעה המגנטית. פטיפון זה – עם יכולת סינכרון שעון 10Mhz עבור יחידת ההנעה המנועית ותצורת שלדה עצמאית של 3 חלקים – היא השיא של Esoteric.
מחיר: 320,000 ₪
משלוח חינם
משלוח חינם: 0 ₪
אחריות: 5 שנים
זמן אספקה: 20 ימים , קיימת אפשרות לאיסוף עצמי
למה לקוחות קונים אצלנו:
  • אחריות: 5 שנים 
  • משלוח חינם, קניה מאובטחת ושירות לקוחות מעולה 
5 שנים חודשי אחריות
משלוח חינם משלוח חינם
קניה בטוחה

מידע נוסף

 לינק למוצר באתר היצרן פטיפון T1 ESOTERIC

 

System MagneDrive ESOTERIC (פטנט יפני מס' 6501130) היא מערכת הנעה של פטיפון ללא מגע המשתמשת בכוח מגנטי לסיבוב על מנת להשיג את הפילוסופיה של "מימוש סאונד מאסטר בהשמעה אנלוגית",

"מניע מגנטי" מותקן בקצה מנוע ההנעה. הצדדים שלו ממוגנטים כך שהקטבים S ו-N מיושרים לסירוגין.

הפלטה עצמה עשויה אלומיניום לא מגנטי, אלא "גלגל אינדוקציה" מברזל רך בצורת strobe מותקן בתחתית הצד שמול הנהג והוא ממוגנט. כשהמניע המגנטי מסתובב ליד הפלטה, הם יסתובבו בצורה סינכרונית, חלקה וללא מגע, הודות לכוח המגנטי.

ניגון תקליטים, הקולטים רעידות מחריצי תקליטים בסדר גודל של מיקרון וממיר אותם לאותות שמע, ביטול רעידות שנוצרו על ידי מנועים חיוני לשחזור צליל הקלטת המאסטר.

System MagneDrive ESOTERIC נקייה מרטט מנוע על ידי ביצוע העברת הכוח מהמנוע לפלטה ללא מגע, ובכך לקבל צליל צלול ונקי.

תכונות מפתח:

מערכת הנעה ללא מגע המוגנת בפטנט Esoteric MagneDrive System

פלטת Magne-Float מפחיתה מאוד את חיכוך נושאי הציר על ידי הפחתת המסה האפקטיבית של המגש מ-19 ק"ג לכדי כ 4 ק"ג.

מורכב מ-3 יחידות מופרדות: יחידה ראשית, יחידת מנוע ויחידת ספק כוח.

בקרת מנוע VCXO באיכות גבוהה מבטיח סיבוב פלטה מדויק.

יכולת סנכרון שעון 10Mhz עם שעון מאסטר Grandioso G1X.

מערכת מיסבים הפוכים תומכת בסיבוב חלק של המגש.

כפתור המיקרומטר בפאנל הקדמי מספק יכולת כוונון עדין של מאפיינים קוליים, על ידי התאמת עוצמת הכוח המגנטי המופעל מהמניע המגנטי אל הפלטה.

שלדה משולשת עשויה אלומיניום ועץ, שולטת ביעילות ברטט.

החלק האמצעישל השלדה מצופה בלכה מבריקה יפהפייה.

לרגלי הבידוד יש מנגנון שיכוך מיוחד המבטל רעידות חיצוניות.

בקרת שתי מהירויות (33/45 סל"ד), מתכווננת בהזמנה של 0.1%.

ה-T1 מוצע עם זרוע דינמית TA-9D, או ללא זרוע.

מתאם זרוע אופציונלי מאפשר ל-T1 להכיל עד 3 זרועות בו זמנית.

מתאמי זרוע אופציונליים קיימים לזרועות מיצרנים שונים.

המחיר כולל זרוע 

Newly Developed Contact-Free Drive Mechanism

Grandioso T1

Japan Patent No. 6501130

Grandioso T1

Grandioso T1

 

Grandioso T1

 

Extremely quiet rotation

For vinyl record playback, which picks up vibrations from record grooves on the order of microns
and converts them into audio signals, the elimination of vibrations generated by motors
is essential for master sound reproduction.
The Esoteric MagneDrive System is free from motor vibration by making the power transmission
from the motor to the platter non-contact, thus obtaining a crystal clear sound.

Grandioso T1

 

Platter with Magne-Float system

The platter is a high-mass design of 19kg machined from aluminum block.
The Magne-Float system reduces the load on the bearing to approximately 4kg,
and contributes to quiet rotation by achieving both silky-smooth rotation
with high rotational inertia and reduced friction level in an ideal manner. In addition,
inverted bearings are employed to bring the fulcrum of the platter closer
to the surface of the vinyl disc and increase the stability of rotation.

The platter surface, which is focused on beautiful appearance,
is carefully finished one-by-one by skilled craftsmen in the final process
to increase surface smoothness and create a beautiful spin pattern that resembles craftwork.

Grandioso T1

 

Accurate synchronous rotation

Along with the non-contact vibration isolation, one of the greatest advantages
of the MagneDrive mechanism is the precise rotational accuracy of the platter.
Magnetic driver and platter, – these two components, like two gears of different sizes,
always rotate precisely in a constant ratio.

As long as magnetic synchronization is maintained, there are no speed fluctuations
and no factors that can cause speed deviations, such as belt stretch,
idler or pulley mechanical accuracy, and so on.

Since this mechanism follows the one and only law of physics "reduction ratio" (gear ratio in gears)
of the two components, the platter maintains a constant and accurate speed of rotation
in any conditions. To maxmize this beauty of the mechanism, the rotation speed is regulated
by directly controlling the current waveform of the motor with a high-precision processor,
instead of using a conventional servo to correct the platter rotation, resulting
in a natural sound free from the fluctuation that is often associated with loop correction.

 

 

פרטים טכניים

פרטי המוצר
  • Turntable section
  • Rotation speed 33 ⅓ rpm、45 rpm
  • Rotation speed adjustment range ±12% (0.1% step)
  • Wow and flutters 0.06% or less (W.R.M.S)
  • Clock input
  • Connector BNC × 1
  • Input impedance 50Ω
  • Input frequency 10MHz (±10ppm)
  • Input level 0.5 to 1.0Vrms (sine wave)
  • Tone arm section (TA-9D)
  • Type Dynamic balance
  • Overall length 326mm
  • Effective length 245mm
  • Distance between tone arm axis to spindle 230mm
  • Overhang 15 ±2mm
  • Tracking error +2° to 1° 21′
  • Needle pressure range 0 to 5g (0.25g step)
  • VTA elevation range 0 to 10mm
  • Cartridge/shell balance range 6 to 38.5g
  • Headshell weight 16.45g
  • General
  • Power
  • Weight AC 120V, 60Hz
  • Weight AC 220 - 240V, 50Hz
  • Power consumption 8W (standby 0.4W)
  • Base unit
  • Overall dimensions (W×H×D) 497 × 215 × 436mm / 19.6” × 8.5” × 17.2” (including protrusions)
  • Weight 17kg / 37.5 lb.
  • Platter
  • Overall dimensions (Diameter × Height) ø315.4 × 103mm / ø12.4” × 4.1”
  • Weight 19kg / 41.9 lb.
  • Motor unit
  • Overall dimensions (W×H×D) 180 × 137 × 450mm / 7.1” × 5.4” × 17.7” (including protrusions)
  • Weight 9kg / 19.9 lb.
  • Power supply unit
  • Overall dimensions (W×H×D) 445 × 131 × 370mm / 17.5” × 5.2” × 14.6” (including protrusions)
  • Weight 18kg / 39.7 lb.
  • Included accessories
  • Installing tools
  •  Spacer block × 1
  •  Height check guage × 1
  •  Install guide rail (L) × 1
  •  Install guide rail (R) × 1
  •  Main unit protection cover × 1
  • Turntable sheet × 1
  • DC power cord× 1
  • Power cord × 1
  • Felt mats (for power supply unit)
  • Handles × 2
  • Owner’s manual × 1
  • Tone arm TA-9D × 1 (not available on the tone arm less model)
  • Owner’s manual for TA-9D × 1(not available on the tone arm less model)
  • Arm base × 1(not available on the tone arm less model)

הירשמו וקבלו 

10% הנחה* 

לרכישה הקרובה שלכם!

וגם קבלו עדכונים, מבצעים והנחות לפני כולם!

*ללא כפל מבצעים והנחות.

no-lazy