ראש VPI GOLDY DUAL MOVING COIL

Built in Japan by Audio-Technica, Voice by VPI: Goldy Dual Moving-Coil Phono Cartridge Plays with High Separation, Wide Responsiveness, Enticing Presence, and a Natural Midrange

The Goldy is another VPI – Audio Technica partnership product. Using the award winning AT-OC9 series as a base with VPI’s voicing, the Goldy is a line contact stylus on a boron cantilever. The Goldy has the same internal and dampening modifications as the Shyla cartridge in addition to other material changes as well.

מחיר: 5,490 ₪

משלוח חינם

קנה עכשיו

משלוח חינם: 0 ₪

זמן אספקה: 30 ימים , קיימת אפשרות לאיסוף עצמי

למה לקוחות קונים אצלנו:

משלוח חינם, קניה מאובטחת ושירות לקוחות מעולה

משלוח חינם משלוח חינם

קניה בטוחה

שאל אותנו על מוצר זה

לקוחות ממליצים

חוות דעת על מוצר

הוסף חוות דעת

טען עוד

טען פחות

מעוניין לקבל מבצעי החנות בדוא"ל הצג את שמי select of start

מידע נוסף

VPI Goldy MC Cartridge

Built in Japan by Audio-Technica, Voice by VPI: Goldy Dual Moving-Coil Phono Cartridge Plays with High Separation, Wide Responsiveness, Enticing Presence, and a Natural Midrange

The Goldy is another VPI - Audio Technica partnership product. Using the award winning AT-OC9 series as a base with VPI’s voicing, the Goldy is a line contact stylus on a boron cantilever. The Goldy has the same internal and dampening modifications as the Shyla cartridge in addition to other material changes as well.

Cartridge Specs:

Body Material: Aluminum

Frequency Response: 20-50,000 Hz

Channel Separation: 28 dB (1 kHz)

Vertical Tracking Angle: 20°

Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)

Recommended Load Impedance: Min. 100 ohms (when head amplifier is connected)

Coil Impedance: 12 ohms (1 kHz)

DC Resistance: 12 ohms

Coil Inductance: 25 mH (1 kHz)

Output: 0.4 mV (at 1 kHz, 5 cm/sec)

Channel Balance: 0.5 dB (1 kHz)

Stylus Shape: Special Line Contact

Stylus Type: Nude rectangular shank

Stylus Curvature Radius: 1.5 x 0.28 mil

Cantilever: 0.28 mm diameter nude boron

Static Compliance: 22 x 10-6 cm/dyne

Dynamic Compliance: 18 x 10-6 cm/dyne (100 Hz)

Wire Used for Coil: PCOCC

Terminal Pins: Brass

Mount: Half-inch

Weight: 7.6 g (0.3 oz)

Dimensions: 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01")

Resources, Awards, and Reviews

חזרה למעלה

קנה עכשיו

קטגוריות ראשיות

ראש VPI GOLDY DUAL MOVING COIL